CORONA R6DM 2.4GHz 6CH DMSS Compatible Receiver for JR XG6 XG7 XG8 XG11XG14 Radio Transmitter

CORONA R6DM 2 4GHz 6CH DMSS Compatible Receiver for JR XG6 XG7 XG8 XG11XG14 Radio TransmitterCompatibility CORONA 2 4GHz DMSS Compatible Receiver is designed to use with JR DMSS 2 4GHz transmitters such as XG6 XG7 XG8 XG11 and XG14 under DMSS protocol mode Feature 1 6ch servo channels in R6DM under normal status 2 S BUS output support expanding servo channels on the 6th channel of R6DM under special status 3 13mS latency under linked with XG7 and 14mS latency under linked with other transmitters Specifications Brand CoronaModel R6DMChannels 6Voltage Range 3 6 8 5VOperating Current 60mA max and 35mA under linkedOperation temperature 10 70 degCLatency 13mS or 14mSSensitivity about 100dBm Weight 11g Bind procedure Turn on the DMSS transmitter leave it 0 5M 1M away the receiver Connect a shorter on CH4 of R6DM signal and GND when bind with XG7 and connect a shorter on CH5 of R6DM when bind with other transmitters Connect the battery to the receiver CH1 CH3 or CH6 for R6DM while pressing down receiver s button Red LED light on and Green LED off when searching signals and turn to Green LED light on and Red LED off indicate bind is succeeded Fail safe setting R6DM set failsafe on the DMSS transmitter just like the operation of the JR s DMSS receivers We highly recommend you set failsafe feature while flying your models An example of a useful Failsafe setting would be to shut down the model s throttle so that it does not fly or drive away uncontroll